AUDIO-TECHNICA: AT-OC9ML3 MC CARTRIDGE

3 - 4 weeks

Product Code: N 912

This product was discontinued on .

The OC9ML3 replaces the critically acclaimed OC9MLII. Building on the enduring reputation of its predecessor, the OC9ML3 features a special line contact stylus embedded into a low profile solid Boron cantilever, ensuring the music signals read by the tip of the stylus are transmitted reliably to the coils.
The OC9's "VC mould" design ensures stability and rigidity whilst the dual moving coil offers excellent stereo separation and improved frequency response for long lasting performance.
The use of PCOCC wire Pure Copper by Ohno Continuous Casting, a special copper with virtually no transverse crystal barriers to impede signal transmission, perfects the performance of the advanced dual coil design.


Type: Moving Coil MC
Frequency response: 15 to 50,000 Hz
Output voltage: 0.4mV 1 kHz, 5 cm/sec.
Channel separation: 30 dB 1 kHz
Channel balance: 0.5 dB 1 kHz
Tracking force: 1.8 to 2.2 g standard: 2.0 g
Coil impedance: 12Ω (1kHz)
DC resistance: 12Ω
Recommended load impedance: Min. 100Ω when Head amplifier is connected
Coil inductance: 25µH 1 kHz
Static compliance: 35 x 10 - 6 cm/dyne
Dynamic compliance: 18 x 10 - 6 cm/dyne 100 Hz
Stylus: Line contact stylus curvature radius: 40 x 7µm
Cantilever: 0.26 mm diameter solid Boron
Vertical Tracking angle: 23 degrees
Dimensions: 17.3H x 16.8W x 25.7L mm
Weight: 8.0 g

Audio Technica

Audio Technica

Audio-Technica was established in 1962 in Tokyo, Japan by Hideo Matsushita as a phonograph cartridge manufacturer. Its first products were the AT-1 and the AT-3 MM stereo phono cartridges. Business rapidly developed and Audio-Technica expanded into other fields....

See more from this brand...