SK-28PTU-PI Development Kit for Raspberry Pi

Product Code: RPI0130

This product was discontinued on .
4D Systems LCD Starter Kits for Use with Raspberry Pi

These starter kits from 4D Systems feature an LCD module with a resistive touch screen, adapter for Raspberry Pi GPIO header, 2GB microSD card, programming adapter and all of the cabling required to interface between a Raspberry Pi (using its serial port) and the LCD module. The user can then quickly begin programming the 4D Systems display module through the Raspberry Pi. This display is a secondary display and does not replace the monitor or TV used to program the Raspberry Pi itself.
Powered from the Raspberry Pi via the GPIO adapter, the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download this). The LCD module is set up to receive a wide range of serial commands from the Raspberry Pi, for example, to display shapes, text, images, to play sounds and log data to the microSD card.

240 x 320 2.8in LCD TFT Touchscreen Display Module
4D-Labs PICASO processor
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
micro-SD card socket
13 x GPIO pins
I2C and UART serial communications
Powered from Raspberry Pi
Adapter allows further Raspberry Pi extension boards to be stacked on the GPIO header
Dimensions: 52 x 83.69 x 15.9mm (2.8in module)
Dimensions: 105.5 x 67.0 x 14.7mm (4.3in module)

Note

Raspberry Pi board is NOT included in the starter kits.

Supplied with

4D Pi GPIO adaptor, 2GB microSD card, uUSB-PA5 Programming Adapter, 150mm 5-way Female-Female jumper cable, 5-way Male-Male adapter, Quick Start User Guide.