Red Pitaya Open Source Instrument

Order Only Item

Product Code: RPI0300

This product was discontinued on .

Red Pitaya Open Source Instrument V1.0.1

Red Pitaya is an open source measurement and control tool in size of a credit card (dimensions: 107 x 60 x 21 mm). It can replace many expensive laboratory measurement instruments.

The Red Pitaya unit is a network attached device based on Linux operating system. It includes Radio Frequency signal acquisition and generation technologies, FPGA, Digital Signal Processing and CPU processing.

The Red Pitaya unit is equipped with a Micro USB socket used for console connection, a Micro SD slot for Micro SD memory card, a RJ45 socket for Ethernet connection and a USB socket used for standard USB devices.


RF Inputs:
Number of channels: 2
Bandwidth: 50 MHz (3 dB)
Input impedance: 1 MΩ // 10 pF
Connector: SMA-F
RF Outputs:
Number of channels: 2
Bandwidth: 50 MHz
Load impedance: 50 Ω
Connector: SMA-F
Auxiliary analog input channels:
Number of channels: 4
Nominal sampling rate: 100 ksps
ADC resolution 12 bits
Input voltage range: 0 to +3.5 V
Input coupling: DC
Connector: IDC connector
Auxiliary analog output channels:
Number of channels: 4
Output type: Low pass filtered PWM
PWM time resolution: 4ns (1/250 MHz)
Output voltage range: 0 to +1.8 V
Output coupling: DC
Connector: IDC connector

Accessories recommended for use with the Red Pitaya Open Source Instrument V1.0.1:
Power supply (EMP3457 and CA0340 ),
Oscilloscope probe ( EQC1902 up to 40MHz),
SMA-BNC Adaptors (not stocked yet),
Micro SD Card

PC-based Instruments
Being several instruments in one small unit, PC-based oscilloscopes are lighter and more portable than traditional test equipment. A field engineer can thereby carry a complete electronics lab loaded onto a notebook computer.

Compact and portable
Can provide a large and detailed colour display on your PC monitor.
Simultaneous views of scope, spectrum analyser and meter modes.
Analogue intensity and digital colour display modes.
Signal storage is limited only by the PC's memory.
Captured waveforms and instrument settings can be shared easily with others.
New functionality through free software upgrades.
Can be used with desktop or laptop PCs

Bandwidth 50MHz
Dimensions 107 x 21 x 60mm
Height 60mm
Length 107mm
Maximum Operating Temperature +30°C
Minimum Operating Temperature +5°C
Minimum Time Base 4ns
Model Number p Red Pitaya v 1.0
Number of Channels 2
Oscilloscope Type USB
Power Source USB
Sample Rate Random 125 Msps
USB Interface Yes
Vertical Resolution 14 bit
Width 21mm