The TM-2X Stereo XY Condenser DSLR Microphone from Tascam is designed to record stereo audio directly to your DSLR camera's microphone input. It can be mounted directly on your camera's hot shoe mount and is capable of being swiveled 180-degrees. The TM-2X has two switchable sensitivities, allowing it to work with a range of cameras. As it is powered by plug-in power from your camera, it requires no external batteries for operation.

- Camera-Mountable
- Swivel by 180-Degrees
- XY Stereo Pattern
- Switchable Sensitivity
- Low-Cut Filter at 130Hz
- Plug-in Power Requires No Batteries
- 120dB Maximum SPL
- Includes Noise Isolation Arm
- Includes Fur Windscreen

A low-cut filter at 130Hz allows you to eliminate low-frequency rumble while the included noise isolation arm helps prevent the mic from picking up mechanical noise from your DSLR. For outdoor filming, a fur windscreen is included to help reduce wind noise. The TM-2X can handle SPL up to 120dB, allowing it to be used on a variety of sources.


Type Condenser
Polar Pattern Cardioid
Frequency Response 50 Hz to 20 kHz
Maximum Input Level 120 dB SPL (@ 1 kHz with sensitivity set to H and low-cut filter set to FLAT)
Output Impedance 1.6 kO (RL = 2.2 kO, Vcc = 2.5 V )
Signal to Noise Ratio 74 dB typical (RL = 2.2 kO, Vcc = 2.5 V )
H Setting: -37 dB (1 kHz, 0 dB = 1 V/Pa), (RL = 2.2 kO, Vcc = 2.5 V )
L Setting: -52 dB (1 kHz, 0 dB = 1 V/Pa), (RL = 2.2 kO, Vcc = 2.5 V )
Low Cut Filters 130 Hz (RL = 2.2 kO, Vcc = 2.5 V )
Cable Length 13" (33 cm)
Connector 1/8" (3.5 mm) TRS stereo mini plug (Tip: left channel, Ring: right channel, Sleeve: ground)
Power Requirement Plug-in power (JEITA standard CP-1203A)
Operating Temperature Range 41 to 95°F (5 to 35°C)
Dimensions (WxHxD) 2.2 x 2.3 x 2.7" (57 x 59 x 69 mm), excluding cable and accessories)
Weight 2.6 oz (75.0 g)

Bulk prices are available on all items, Please login to get bulk prices. Or call 09-8375020 for a price!