RGB LED Controller Module
ESP8266 ESP-01 ESP-01S - 2 LEFT!
Product Code: MOD0860
$4.80
Pay it in 4 payments of $1.20 with 
| Buy 1+ | $4.80 (incl. GST) |
This is a WS2812 RGB LED control module based on ESP-01 / 01S. With it, you can easily control the WS2812 light bar / light ring. DIY own lighting control system. Support Ard uino IDE programming.
characteristic:
* Master: ESP-01 / ESP-01S (This module does not include ESP-01 / ESP-01S)
* Control Pin: GPIO2
* Interface: 3Pin PH2.0 connector
* Operating Voltage: DC 3.7V-5V (Please note: The positive supply voltage VCC on the board is connected to the VCC on the WS2812 3PIN connector. Therefore, if your light bar / lamp ring is 5V powered, use DC 3.7V-5V power supply.)
* Support 3.7V lithium battery
Shipping list:
1.ESP-01S RGB LED module X1 (not include ESP-01S WiFi module and RGB LED)
2. 3PIN PH2.0 connector X1
Application example:
1. Power supply: 3.7V-5V DC power supply to the VCC GND (2.54mm pin)
2.Download the program to ESP-01S
3. Insert the ESP-01 / ESP-01S into the 2 * 4 Pin header (in the direction of the arrow) as shown below:
MODULE
The Bits that Count! Surplustronics sells masses of Arduino boards and other pre-made modules ready for your project. These come under the MODULE brand which is exclusive to Surplustronics. While much of this can be purchased online from overseas, we carry huge stocks right here in Auckland and your...
