Vonyx Vinyl DJ Set - Complete DJ setup with turntables and analog mixer

Vinyl running like a pro
With this Vonyx DJ setup you work with two DT6000 turntables and a VDJ250 rotary mixer in a clear two-channel setup. Turning is going to be old-fashioned fun again with this vinyl DJ set. It’s all about timing and technique when mixing vinyl, and then you don’t want to be distracted by displays and/or sync functions. You put two plates next to each other and build your set step by step. Perfect for when you're in genres with long-lasting tracks and likes longer transitions. Whether you practice at home or play in a small club, with this oldschool DJ setup you become a real pro in manual mixing.

Direct-drive decks
The DT6000 turntables form the basis of this setup and give you direct grip on your mix. The direct-drive motor with 3.6 kg/cm torque starts immediately and continues to run tightly at speed, which you notice with cue’en and small pitch corrections. You put the needle in the groove, set up your track and can get started right away. The S-shaped tone arm with anti-skating and adjustable counterweight keeps everything stable, even if you actively mix or occasionally do a backspin. With 331⁄3 and 45 rpm and a pitch range of ±10% you can easily work with different plates and bring them tightly to pace. The strobe lamp helps you visually in the right placement of your tracks and can be switched on or off as desired. This way you work exactly as you are used to behind the decks.

Rotary mixer
The VDJ250 rotary mixer fits perfectly with oldschool turning and immediately gives you that familiar rotary feel. You work with rotary knobs instead of faders, so you build up the volume per channel in a controlled manner and gradually let your tracks run together. This works especially well with longer tracks and smooth blends. Because you do not use faders, you also prevent a track from accidentally turning away too quickly. The two-channel layout keeps it clear and keeps you focused: channel 1 left and channel 2 on the right, it can be that simple. With the EQ buttons you adjust your sound and determine how your mix sounds. Via the PFL function you listen to your next track in front of and with the VU meters you immediately see if your levels are in good condition.

Everything logically connected
This DJ setup connects quickly and works immediately. You connect the turntables via the phono inputs and send the signal via XLR to a PA system or via RCA to an amplifier. You use the booth output for your monitors and via the REC output you record your set. In addition, you can easily plug in your headphones and microphone on the front of the mixer. This way everything is logically laid out and you can fully focus on your vinyl DJ set and not on the cabling.