Audio Technica AT-VM95C Dual Moving Magnet Cartridge
Conical stylus
Product Code: N 905
This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
- VM95 Series dual magnet cartridge with 0.6 mil conical stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus
Frequency Response | 20-20,000 Hz |
Channel Separation | 18 (dB at 1 kHz) |
Vertical Tracking Angle | 23° |
Vertical Tracking Force | 1.8-2.2 g (2.0 g standard) |
Stylus Construction | Bonded round shank |
Recommended Load Impedance | 47,000 ohms |
Coil Impedance | 3.3 k ohms (1 kHz) |
DC Resistance | 485 ohms |
Coil Inductance | 550 mH (1 kHz) |
Load Capacitance | 100 to 200 pF |
Output | 4.0 mV (1 kHz, 5 cm/sec.) |
Channel Balance | 2.5 dB (1 kHz) |
Stylus Shape | 0.6 mil conical |
Cantilever | Aluminum pipe |
Mount | Half-inch |
Weight | 6.1 g (0.22 oz) |
Dimensions | 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D |
Replacement Stylus | AT-VMN95C |
Accessories Included | Two 11 mm installation screws, two 8 mm installation screws, two washers |
Audio Technica
Audio-Technica was established in 1962 in Tokyo, Japan by Hideo Matsushita as a phonograph cartridge manufacturer. Its first products were the AT-1 and the AT-3 MM stereo phono cartridges. Business rapidly developed and Audio-Technica expanded into other fields....