Seal Lead Acid Battery Charger - 1000mA Output
For 12 Volt SLA Batteries
Product Code: EMB3619
A mains powered Lead Acid battery charger designed for 12V batteries. Features intelligent automatic charge controller to stop charging when the battery is full and maintain the battery with a ‘floating’ charge mode. This feature allows you to leave the charger connected to the battery without risk of overcharging and know your battery is always ready to go. Includes a 2m long cable with interchangeable DC plug and Alligator clips.
Features:
Float output voltage: 13.6V
Bulk charge mode voltage: 14.4V
Suitable for: jet skis and small motor bikes
NOTE: These chargers are not recommended for long-term "maintenance" charging of unsealed lead-acid batteries, the types with removable filler caps and liquid elctrolyte. Long-term continuous float charging of this type of battery may cause loss of water from the electrolyte, ruining the battery.
Specifications| Length : 70mm |
| Width : 40mm |
| Depth : 40mm |
| Cable length : 2m |
| Mains Voltage Range : 100V, 240V |
| Frequency : 50Hz |
| Rated for AU Mains : true |
| Rated for US Mains : true |
| Auto-select mains voltage : true |
| Mains Item connection : Mains AU/NZ 3 Pin |
| Type of Batteries : Sealed Lead Acid (SLA), Deep Cycle SLA, Deep Cycle Gel Cell, Lead Acid |
| Charger Output Voltage : 12V |
| Charger Output Current : 1A |
| Controller Type : Multi-Stage |
| Connection Type : Alligator Clips |
Manuals and Downloads
